VCL Products > TDM over IP > VCL-T1oP (8T1 Port GE Version) - Technical Specifications
Our Gigabit Ethernet (GE) version products use a high-stability timing, Ultra Low Noise OCXO for accurate timing and highly stable clock synchronization. This provides very stable clock synchronization and exceptional performance even under the most demanding network conditions.
VCL-T1oP (8T1 over IP / Ethernet GE Version)
TDM over IP / TDM over Packet / TDM over Ethernet
Technical Specification
'VCL-T1oP' T1 TDM over Packet (8 T1 Port GE Version) TDM over IP equipment supports transmission of up to 8 x T1 links over IP/Ethernet, MEF, or MPLS pseudo-wire networks. The 'VCL-T1oP' T1 over Packet (8 T1 Port GE Version) TDM over IP equipment is equipped with a highly reliable clock recovery mechanism for low jitter and wander control, even under variable network conditions.
Port Trunking and Spanning Tree ProtocolT1oP Specifications
| Max number of T1 Ports | Number of Ports 8 |
| Max number of logical links | Up to 64 |
| Synchronization clock recovery |
|
| Max number of Ethernet ports |
|
| Supported Transport | ETF-PWE3, SAToP and CESoPSN Mechanisms |
| Supported PSN (Packet Switched Networks) type | UDP, IP, MPLS and MEF |
| QoS | 802.1q, 802.1p packet priority |
Gigabit Optical Ethernet Specifications
| Type | SFP |
| Compliance |
|
| Safety | Class 1 Laser Safety/ IEC-60825 Compliant |
| Bit Rate | 1.25 Gbps |
| Wavelength | 1310 / 1550 nm |
| Distance | 550m to 80Kms, as per order |
| Optical Connector | LC |
Command Language
- Windows-based GUI (Graphical User Interface)
- Command Line Interface (English text commands)
Environment
| Temperature | -20°C ~ +60°C for Operation |
| Humidity | 5% to 95% (at 35°C) Non-condensing |
Regulatory Compliance
- Safety—IEC 60950 Safety—IEC 60950
- CE
- RoHS
- Complies to ANSI/IEC standards
- Complies with Telecom Part 68, FCC Part 15, and CISPR 22 Class A
- EMC EN55022: 1998 + A1 and A2
- EMC EN55024,
- Operation ETS 300 019 Class 3.2
- Storage ETS 300 019 Class 1.2
- Transportation ETS 300 019 Class 2.3
NMS (with Telnet) OAM port Specifications
| Network Interface | RJ-45 10/100/1000BaseT (Auto sensing) |
| Compatibility | Ethernet Version 2.0 IEEE 802.3 |
| Protocols supported | ARP, UDP/IP, TCP/IP, Telnet, ICMP, SNMP |
| Management | SNMP, Serial login, Telnet login |
| EMI Compliance |
|
External Alarms
- Dry Contact Relay—2 Form C
- Rated up to 72V DC, 1 Amp.
Chassis
- 1U High (44mm)
- 19-inch rack-mounting shelf
- Also available in desktop/tabletop version.
Mechanical Specification
| Height | 44 mm (1U) |
| Depth | 260 mm |
| Width | 480 mm (19 inch rack mountable) |
| Weight | 3 Kgs. |
T1 Interface
| Number of Ports | Number of Ports 8 (supporting 64Kbps upto 1.544Mbps on each port) |
| Framing Formats | SF, ESF, Unframed |
| Line Coding | AMI, B8ZS |
| Compliance | ITU-T G.703, G.704, G.706 |
| Jitter and Wander | Complies to ITU-T G.824 |
| Line Impedance | 100 Ohms balanced |
Management and Control Interfaces
- COM Port (RS232 Serial Port)
- 10/100/1000BaseT Ethernet Port (each multiplexer may be assigned an IP address and connected to a LAN / IP network for remote access and management through the 10/100BaseT Ethernet Port for in-band configuration, management and access)
- Telnet
- SNMP, V2
- Additionally, a Windows based GUI (Graphical User Interface) for easy configuration, management and access.
Ethernet Interface
| Number of Ports |
|
| Electrical | 10/100/1000 Auto-negotiation / MDI-X (Auto-sensing), Full-Half Duplex, RJ45 Electrical Connector |
| Protection | ESD protection |
| Optical | 100Base-FX (Gigabit Ethernet), SFP |
| Protection | ESD protection |
| Maximum Frame Size | 9000 Bytes (Jumbo Frames) |
| Switching Capacity | Upto 6 Gbps, Non-blocking |
Power Supply Options
- Dual Redundant
- 1+1 AC power (100 to 240V AC, 50 / 60 Hz)
- 1+1 DC (-48V) power (40 to 72V DC)
- 1+1 DC (-24V) power (18 to 40V DC)
- AC plus DC (AC + DC), AC or DC
- EMI/EMC compliant.
24V DC Power Supply Specifications
| Power Supply | 24V DC |
| Range of input | 18V to 40V DC |
| Input voltage reversal protection | Provided |
| Under voltage protection | < 4.85V |
| Over voltage protection | > 5.15V |
| Efficiency at full load | > 90% @ 5V/4A (when input voltage-24V) |
| Ripple at full load | < 5mVrms |
| Spike at full load | < 50mV |
Power Consumption
| Power Consumption | <18 Watts |
48V DC Power Supply Specifications
| Power supply | -48V DC |
| Range of input | -40V DC to -72V DC |
| Under voltage protection | < 4.85V |
| Over voltage protection | > 5.15V |
| Efficiency at full load | > 91% @ 5V/2A (when input voltage -48V) |
| Ripple at full load | < 5mVrms |
| Spike at full load | < 50mV |
AC Power Supply Specifications
| Input AC Voltage | 110 / 220 Volts AC |
| Range of input AC Voltage | 100 V to 240 V AC, 50Hz/60Hz. |
| AC Input Connector | IEC Connector |
Other Related Products:
VCL-E1oP (2E1 Port FE) VCL-E1oP (2E1 Port GE) VCL-E1oP (4E1 Port FE) VCL-E1oP (8E1 Port GE) VCL-E1oP (16E1 Port GE) VCL-E1oP (32E1 Port GE) VCL-T1oP (2T1 Port FE) VCL-T1oP (2T1 Port GE) VCL-T1oP (4T1 Port FE) VCL-T1oP (8T1 Port GE) VCL-T1oP (16T1 Port GE) VCL-T1oP (32T1 Port GE) VCL-DS3oP - DS3/T3 over IP / DS3/T3 over Ethernet VCL-E3oP - E3 over IP/ E3 over Ethernet
VCL-E1oP (2E1 Port FE) VCL-E1oP (2E1 Port GE) VCL-E1oP (4E1 Port FE) VCL-E1oP (8E1 Port GE) VCL-E1oP (16E1 Port GE) VCL-E1oP (32E1 Port GE) VCL-T1oP (2T1 Port FE) VCL-T1oP (2T1 Port GE) VCL-T1oP (4T1 Port FE) VCL-T1oP (8T1 Port GE) VCL-T1oP (16T1 Port GE) VCL-T1oP (32T1 Port GE) VCL-DS3oP - DS3/T3 over IP / DS3/T3 over Ethernet VCL-E3oP - E3 over IP/ E3 over Ethernet