|
|
 |
|
|
|
.
Whats New at Valiant
Valiant Communications Limited is an ISO
9001:2008 certified equipment manufacture of telecom transmission equipment and solutions
with installations in over 90 countries, worldwide. Valiant's technological strengths span
a wide section of the telecom transmission area including Gigabit Ethernet over SDH /
STM-1, E1, T1 High Speed Signaling Link Monitoring solutions, E1, T1, DS3 Protection
Switches and Automatic Protection (APS) Switching equipment and a fast paced new product
development strategy. Valiant's equipment is focused on integrating voice, data and IP
networks.
Our international offices, distributors and representatives are located (in
alphabetical order) in Austria, Bangladesh, Bahrain, Brazil, Canada, Columbia, France,
Indonesia, Iraq, Italy, Jordan, Lebanon, Lithuania, Nigeria, Singapore, Sri Lanka, U.A.E.,
United Kingdom, U.S.A., and Uruguay. |
|
|
|
|
|
2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 |
.gif) |
April 2, 2010
Valiant offers its latest 64 Port E1 HSL (High Speed Signaling Link) Monitoring Groomer
for "non-intrusive" monitoring application and for monitoring of upto 32,
"live" HSL E1 (High Speed Signaling Link) traffic links, bi-directionally (i.e.
in both transmit and receive directions). To read
more... |
.gif) |
|
March 22,
2010
Valiant offers its latest Gigabit Ethernet to SDH / STM-1 converters (Gigabit Ethernet
over SDH Converters) packaged in a 1U (44mm high) box in a 19-inch rack mount chassis. To read more... |
|
|
February 1,
2010
Valiant offers its 8E1/T1 and 16E1//T1 TDM over IP (T1 over Ethernet multiplexers) which
are used to provide upto 8 or 16, E1 or T1 communication channels over Ethernet or IP
networks. To read more... |
|
|
January 21,
2010
Valiant's introduces its smaller version 16
Port Hi-Z Monitoring Groomer (High Impedance) DACS (E1 and T1 available), for
monitoring and connecting to billing equipment for non-intrusive monitoring of live
traffic or signaling, required by billing servers etc. To read more... |
|
|
September 1, 2009
Valiant introduces E1 TDMoIP and T1 TDMoIP - E1 and T1 over Ethernet
multiplexer (TDM over IP) product is used to provide upto 1E1/T1 and 2E1/T1 communication
channels over Ethernet or IP networks. To
read more... |
|
|
March 1,
2009
Valiant offers its VCL-MX Version 5 - with 12 x E1 carrier class bandwidth provisioning E1
Multiplexer that may be used for inter-connecting legacy voice and data networks, for
provisioning and managing bandwidth on a E1 channelized level as well as 64Kbps, DS-0
time-slot level. Supports FXO, FXS, E&M (2 Wire/4 Wire), FXS-FXS (Hot-line), RS232,
G.703 @ 64 Kbps, Co-Directional, Conference facility, V.35, V.36, X.21, RS530, 10BaseT -
Ethernet interfaces with Remote Management. This 12 x E1 Multiplexer / digital-access
cross-connect equipment can be used in a Point-to-Point, Point-to-Multi point, Add-Drop
(drop-insert), Tree and Star topology applications. Offers and supports telnet, SNMP V2,
GUI, In-band and Out-of-band management options. . To
read more.... |
|
|
August 4, 2008
Valiant offers its latest STM-1 monitoring and grooming equipment which may be used to
"non-intrusively" monitor "bi-directional" STM-1 links through a 80:20
optical splitter patch panel and allow the user to select 64Kbps time-slots and groom them
to E1 output ports, which may be then connected to E1 probes, E1 signaling analyzers and
billing servers etc. To read more... |
|
|
July 30, 2008
Valiant offers its latest E1 Digital Microwave Radios (4E1/8E1) for 5.8GHz un-licensed
frequency band. To read more... |
|
|
June 30,
2008
Valiant's DS3 Fail-Over (DS3 Protection) Switch allows the user to connect a single DS3
line from the telephone company to an "active", as well as to a
"standby" DS3 terminal, such as data server / router etc., at the customer
premises. In the event of the failure of the data server / router connected to the "A
/ active" port of the DS3 Protection (Fail-Over) Switch, it shall automatically
switch and connect the DS3 line from the telephone company to the data server / router on
the "B / standby" port. To read more... |
|
|
June 15,
2008
Valiant's E3 Fail-Over (E3 Protection) Switch allows the user to connect a single E3 line
from the telephone company to an "active", as well as to a "standby"
E3 terminal, such as data server / router etc., at the customer premises. In the event of
the failure of the data server / router connected to the "A / active" port of
the E3 Protection (Fail-Over) Switch, it shall automatically switch and connect the E3
line from the telephone company to the data server / router on the "B / standby"
port. To read more... |
|
|
May 30, 2008
Valiant offers its cost effective Ethernet to STM-1 converters (Ethernet over SDH
Converters) packaged in a 1U (44mm high) box in a 19-inch rack mount chassis. Valiant
Ethernet to STM-1 converters (Ethernet over STM-1 converters) provides upto 2 fast
Ethernet ports on the user side which may be used to transport Ethernet traffic over a
STM-1 SDH link. The converter provides a simple and cost effective method to convert and
transport 10/100BaseT Ethernet data over an STM link. To read more... |
|
|
May 1, 2008
Valiant offers its latest 8 E1 Optical Multiplexer with 100Mbps Ethernet data, high
performance optical line transmission equipment which combines 8, ITU-T G.703 compliant
standard electrical E1s plus 100Mbps Ethernet signal into an optical data stream for
transport over fiber optic pairs. To read more... |
|
|
April 15,
2008
Valiant offers its latest 4 E1 Optical Multiplexer with 100Mbps Ethernet data, high
performance optical line transmission equipment which combines 4, ITU-T G.703 compliant
standard electrical E1s plus 100Mbps Ethernet signal into an optical data stream for
transport over fiber optic pairs. To read more... |
|
|
March 3, 2008
Valiant offers its latest E1 and Ethernet Digital Microwave Radio solutions for digital
wireless transmission
- Solutions for 5.8GHz, 7GHz, 8GHz, 13GHz, 15GHz
- QPSK and 16QAM modulation options
- To read more...
|
|
|
February 10,
2008
Valiant's latest VCL-STM-1
Optical to STM-1 Electrical converter provides a simple and cost-effective conversion
between STM-1 optical interface to STM-1 electrical interface. VCL-STM-1 Optical to STM-1
Electrical converter is an interface conversion equipment supplied with one STM-1
electrical interface and one STM-1 optical interface. To read more...
|
|
|
January 30,
2008
16 T1 Links (48 T1 Ports) Protection Switching:
Used to protect upto 16 T1 Links (48 T1 Ports), point-to-point links and provide an
alternate communication route to each T1 Link between any two T1 points, in the event of
the failure of the primary (Main) T1 communication route. To read more...
|
|
|
January 25,
2008
8 T1 Links (24 T1 Ports) Protection Switching:
Used to protect upto 8 T1 Links (24 T1 Ports), point-to-point links and provide an
alternate communication route to each T1 Link between any two T1 points, in the event of
the failure of the primary (Main) T1 communication route. To read more...
|
|
|
January 15,
2008
16 E1 Links (48 E1 Ports) Protection Switching:
Used to protect upto 16 E1 Links (48 E1 Ports), point-to-point links and provide an
alternate communication route to each E1 Link between any two E1 points, in the event of
the failure of the primary (Main) E1 communication route. To read more...
|
|
|
January 10,
2008
8 E1 Links (24 E1 Ports) Protection Switching:
Used to protect upto 8 E1 Links (24 E1 Ports), point-to-point links and provide an
alternate communication route to each E1 Link between any two E1 points, in the event of
the failure of the primary (Main) E1 communication route. To read more...
|
|
|
|
Home
| About Us | Contact
Us | Products | Whats New | Press
| E-mail
Please
click here to read our Notices of Copyrights and Trademarks
© Valiant Communications Limited, 1997-2010. All rights
reserved.
E-mail: Contact Us
Web Site: http://www.valiantcom.com |
|
